Cisco Firepower 2110 Hardware Installation Guide

2140213021202110Feature
12 fixed RJ-45 1 G/100 M/10 M ports (named Ethernet 1/1 through 1/12 )Network ports
Four fixed 1-G/10-G SFP+ ports
Four fixed 1-G SFP portsSFP ports
Yes
Displays serial number
Pullout asset card
Yes
On rear panel
Grounding lug
Yes
On front panel
Locator beacon
Yes
On rear panel
Power switch
One
Not hot-swappable
NoNetwork module
slots
8-port 1-Gigabit Ethernet SFP+
8-port 10-Gigabit Ethernet SFP+
6-port 1-Gigabit Ethernet SX fiber
fail-to-wire
6-port 10-Gigabit Ethernet SR fiber
fail-to-wire
6-port 10-Gigabit Ethernet LR fiber
fail-to-wire
—Network modules
Two power supply
slots
Ships with two
400-W AC power
supply modules
Hot-swappable
Two power supply
slots
Ships with one
400-W AC power
supply modules
Hot-swappable
One fixed AC power supply moduleAC power supply
Yes (optional)NoDC power supply
YesNoRedundant power
One hot-swappable fan tray with four fansFour fixed fansFan
Cisco Firepower 2100 Series Hardware Installation Guide
3
Overview
Features

Cisco Firepower 2110 Specifications

General

Rack Units	1 RU
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	10% to 90% non-condensing
Maximum Concurrent Sessions	2, 000, 000
AVC Throughput	2.2 Gbps
Interfaces	8 x 1G, 2 x 10G SFP+
Power Supply	AC
Dimensions (H x W x D)	1.72 x 17.3 x 16.5 in
Storage Temperature	-4°F to 149°F (-20°C to 65°C)