Cisco Firepower 4100 Series User Manual

1100 WMaximum output power
50 to 60 HzFrequency
1+1 redundantRedundancy
92%Efficiency at 50% load
DC Power Supply
The power supplies can supply up to 950 W of power across the input voltage range. The load is shared when
both power supply modules are plugged in and running at the same time. The power supply modules are
hot-swappable.
Table 8: DC Power Supply Module Hardware Specifications
SpecificationDescription
-40 to -60 V DCInput voltage
26 A (at 40 V DC)Maximum current
950 WMaximum output power
1+1 redundantRedundancy
92%Efficiency at 50% load
Power Supply Module LEDs
The following figure shows the two-color power supply LEDs. The LEDs are located on the upper right side.
Figure 15: Power Supply Module LEDs
Green OK LED2Amber FAIL LED1
The following table describes the power module supply LEDs and their states.
Overview
24
Overview
Power Supply Modules

Cisco Firepower 4100 Series Specifications

General

Brand	Cisco
Model	Firepower 4100 Series
Category	Firewall
Language	English