Cisco GS7000 Troubleshooting

NotesState IndicatedLED Pattern or ColorLED
Indicates that the RPD has received and
applied at least one upstream channel
configuration
At least one upstream channel
configuration received (and a
MAP was received for that
channel), awaiting upstream
burst transmissions
2 Hz Flash PatternU-RF
LEDs
Indicates at least one CM's burst
transmission has been received
First upstream transmission
recognized
4 Hz Flash Pattern
Upstream deemed operationalAt least one CM has
successfully completed
upstream ranging
Steadily Illuminated
Fault detected in US RF port or no
configuration received
Upstream RF port fault or no
configuration
Unilluminated
Troubleshooting
11
Troubleshooting
Reference: 2x2 RPD Module LEDs

Cisco GS7000 Specifications

General

Brand	Cisco
Model	GS7000
Category	Network Hardware
Language	English