Cisco linksys PLTK300

QUICK INSTALLATION GUIDE
Powerline
Network Kit
Model: PLTK300
Package Contents
Powerline 4-Port Network Adapter •
(model number: PLTS200)
Powerline Network Adapter (model •
number: PLTE200)
Powerline Utility and User Guide •
on CD-ROM
2 Ethernet Network Cables•
2 Power Cords•
Quick Installation Guide•
2 Stands•

Cisco linksys PLTK300 Specifications

General

Model	PLTK300
Category	Network Hardware
Technology	HomePlug AV
Maximum Data Rate	200 Mbps
Data Rate	200 Mbps
Encryption	128-bit AES
Operating Voltage	100-240V AC
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Humidity	10% to 85% Non-condensing
Product Type	Powerline Adapter
Standard	IEEE 802.3

Summary

Overview

Connect Adapter to Router

Connect the Powerline Network Adapter (PLTE200) to your router using an Ethernet cable.

Connect Power to Adapter

Connect the power cord to the Adapter and plug it into an electrical outlet.

Verify First Adapter LEDs

Check that the Power and Ethernet LEDs on the Adapter light up.

Install the Second Adapter

Connect Ethernet Cable to 4-Port Adapter

Connect one end of an Ethernet cable to the Powerline 4-Port Network Adapter (PLTS200).

Connect Cable to Computer

Connect the other end of the Ethernet cable to a computer.

Connect Power to 4-Port Adapter

Connect the power cord to the Power port of the 4-Port Adapter.

Plug 4-Port Adapter into Outlet

Plug the power cord into an electrical outlet for surge protection.

Verify 4-Port Adapter LEDs

Confirm Power, Ethernet, and Powerline LEDs light up.

Verify First Adapter Powerline LED

Ensure the Powerline LED of the first adapter installed lights up.