Cisco linksys PLTK300 - Install the Second Adapter; Connect Ethernet Cable to 4-Port Adapter; Connect Cable to Computer; Connect Power to 4-Port Adapter

Install the Second Adapter 2
A. Connect one end of an Ethernet
network cable to an Ethernet
port on the Powerline 4-Port
Network Adapter (model
number: PLTS200).
B. Connect the other end of the
cable to a computer.
NOTE: You can connect additional computers or other network
devices to the remaining Ethernet ports of the 4-Port Adapter.
C. Connect the power cord to
the Power port of the 4-Port
Adapter.
Connect Ethernet Network Cable
Connect Other End of Network Cable
Connect Power Cord