Cisco IE-2000-16TC-G-E User Manual

Cisco Systems, Inc. www.cisco.com—CiscoSans
Cisco IE 2000 Switch Hardware Installation
Guide
First Published: June 2012
Last Updated: December 2015

Cisco IE-2000-16TC-G-E Specifications

General

Brand	Cisco
Model	IE-2000-16TC-G-E
Category	Switch
Language	English

Summary

Product Overview

Switch Models

Ports and Slots

Power Connectors

Explains how to connect power to the switch.

Switch Installation

Preparing for Installation

Warnings

Lists critical safety warnings for installation.

Connecting to a Console Port

RJ-45 Console Port

USB Mini-Type B Console Port

Connecting to Power

Supported Power Supplies

Grounding the Switch

Connecting the Power Converter to an AC Power Source

Connecting the AC Power Source to the Power Converter

Connecting the Power Converter to a DC Power Source

Running Boot Fast

Installing the Switch on a DIN Rail

Connecting Alarm Circuits

Wiring the External Alarms

Connecting Destination Ports

Connecting to 10/100 and 10/100/1000 Ports

Instructions for connecting Ethernet ports.

Installing and Removing SFP Modules

Procedure for SFP module installation/removal.

Connecting to SFP Modules

Connecting to a Fiber Optic SFP Module

Steps for fiber optic connections.

Connecting to a Dual-Purpose Port

Verifying Switch Operation

Troubleshooting

Diagnosing Problems

Overview of troubleshooting methods.

Switch Connections

Troubleshooting connection issues.

Switch Performance

Speed, Duplex, and Autonegotiation

Resetting the Switch

Configuring the Switch with the CLI-Based Setup Program

Accessing the CLI Through the Console Port

How to access the CLI.

Entering the Initial Configuration Information

IP Settings

Information needed for IP configuration.

Completing the Setup Program