Need help?Do you have a question about the Cisco IE-4000-8GT8GP4G-E and is the answer not in the manual?
General| Model | IE-4000-8GT8GP4G-E |
|---|---|
| Type | Industrial Ethernet Switch |
| Operating Temperature | -40°C to 75°C (-40°F to 167°F) |
| DRAM | 2 GB |
| Flash Memory | 4 GB |
| MTBF | 1, 000, 000 hours |
| Power over Ethernet | Yes |
| MAC Address Table Size | 16, 000 entries |
| Jumbo Frame Support | Yes (up to 9216 bytes) |
| Ports | 8 x 10/100/1000BASE-T |
Guides the user through installing the switch, verifying boot fast, and connecting it to other devices.
Provides essential information and procedures before beginning the switch installation process.
Lists critical safety warnings and precautions to be observed during switch installation and handling.
Provides guidelines for determining the optimal placement of the switch, considering environment and enclosure requirements.
Outlines general guidelines for proper installation, including ESD protection, grounding, and cable length considerations.
Introduces the process of connecting the switch to a power source.
Provides detailed instructions and requirements for properly grounding the Cisco IE 4000 switch.
Details the steps for connecting the power converter to an AC power source, including wiring and terminal connections.
Explains how to connect the power converter to a DC power source, including wire stripping and terminal connections.
Provides crucial cautions and warnings before wiring the switch to a DC power source.
Details the steps for securely attaching the power connectors to the switch's front panel.
Instructs on applying power, notes LED status, and describes the automatic boot fast sequence.
Details the procedures for mounting the switch, specifically on a DIN rail.
Provides step-by-step instructions for mounting the Cisco IE 4000 switch onto a DIN rail using its spring-loaded latch.
Guides the user through connecting external alarm circuits to the switch.
Provides information on connecting various types of destination ports, including Ethernet and SFP modules.
Details how to connect devices to the switch's 10/100 and 10/100/1000 Ethernet ports.
Explains the process for installing and removing SFP modules from the switch's SFP module slots.
Provides steps for connecting fiber-optic cables to SFP modules, including port LED observation.
To Next Page
