2-1
Cisco IE 4000 Switch Hardware Installation Guide
CHAPTER
2
Switch Installation
This chapter describes how to install your switch, verify the boot fast, and connect the switch to other
devices. It also includes information specifically for installations in hazardous environments.
Read these topics, and perform the procedures in this order:
• Preparing for Installation, page 2-1
• Installing or Removing the Flash Memory Card (Optional), page 2-6
• Connecting to a Console Port (Optional), page 2-7
• Connecting to Power, page 2-7
• Installing the Switch, page 2-19
• Connecting Alarm Circuits, page 2-23
• Connecting Destination Ports, page 2-27
• Verifying Switch Operation, page 2-31
• Where to Go Next, page 2-31
Preparing for Installation
This section provides information about these topics:
• Warnings, page 2-2
• Installation Guidelines, page 2-4
• Installation Guidelines, page 2-4
• Verifying Package Contents, page 2-6
To Next Page
Loading...
