Cisco IP Phone 8851 User Manual

Cisco IP Phone 8851
Quick Start Guide
Turn OffTurn On
Please enter you PIN
followed by the # sign.
1. Listen to Messages
8. Personal Options
9. Repeat Menu
Press the voicemail soft button
1. Change PIN
2. Save 3. Erase 9. Repeat
2. Personalize
Greeting
3. Personal
Name
5. Unconditional
Call Forwarding
6. Call Screen
Forwarding
Number
9. Repeat
Menu
0. Exit Menu
Please enter
your new PIN
followed by the
# sign
1. Record
default
greeting
2. Record
greeting for
calls sent to
voice mail
when busy
3. Record
greeting for
call that you do
not answer
Please record
your name
after the beep
When finished
press #
1. Forward all
calls
2. Send calls to
line
Please enter
the forward
destination
number
followed by the
# sign
1. Skip 0. Exit Menu
New Message / Saved message
0. Exit Menu
Please record your greeting after the beep
When finished press #
Call Forwarding
is currently
(Disabled or
Enabled)
- From another phone, dial your phone number.
- Listen for your voicemail greeting and press #.
To access your voicemail from any Phone
Press Messages and follow the voice
prompts.
-- See voicemail map Below.--
Listen to Voice Messages
Press Volume up or down to
adjust the ringer volume when the phone is
not in use.
Adjust the Ringtone Volume
1. Press Applications .
2. Select User Preferences > Audio
Preferences.
3. Select a line.
4. Scroll through the list of ringtones and
press Play to hear a sample.
5. Press Set and Apply to save a selection.
Change Ringtone
1. Press Applications .
2. Select User Preferences > Screen
Preferences > Display Brightness.
3. Press right to increase, or left to
decrease, the brightness.
4. Press Save.
Adjust the Screen Brightness
1. Press Applications .
2. Select Preferences > Screen
Preferences > Backlight Timer.
3. Press Navigation Button to set
the backlight duration.
4. Press Set.
Adjust the Screen Backlight
1. Press Mute .
2. Press Mute again to turn mute off.
Mute Your Audio
Press Volume up or down to
adjust the handset, headset, or speakerphone
volume when the phone is in use.
Adjust the Volume in a Call
All manuals and user guides at all-guides.com

Cisco IP Phone 8851 Specifications

General

Resolution	800 x 480 pixels
Audio	Wideband audio
Bluetooth Version	Bluetooth 3.0
Power	Power over Ethernet (PoE) or optional power adapter
Ethernet	10/100/1000
Protocols	SIP
Codec Support	G.711, G.722, G.729a, iLBC
Headset Jack	Yes
Wi-Fi	No
USB Ports	2 x USB 2.0
Lines	Up to 5 lines
Dimensions	229 x 257 x 40 mm (excluding foot stand)