Cisco L2TP User Manual

Table 2: Required Information for Destination Context Configuration
DescriptionRequired Information
This is an identification string between 1 and 79
characters (alpha and/or numeric) by which the
destination context will be recognized by the system.
For this configuration, the destination
context name should not match the domain
name of a specific domain.
Important
Destination context name
PDN Interface Configuration
This is an identification string between 1 and 79
characters (alpha and/or numeric) by which the
interface will be recognized by the system.
Multiple names are needed if multiple interfaces will
be configured.
PDN interfaces are used to connect to a packet
network and are configured in the destination context.
PDN interface name
These will be assigned to the PDN interface.
Multiple addresses and/or subnets are needed if
multiple interfaces will be configured.
IP address and subnet
A single physical port can facilitate multiple
interfaces.
Physical port number
This is an identification string between 1 and 79
characters (alpha and/or numeric) by which the
physical port will be recognized by the system.
Multiple descriptions will be needed if multiple ports
will be used.
Physical ports are configured within the destination
context and are used to bind logical PDN interfaces.
Physical port description(s)
Used when configuring static routes from the PDN
interface(s) to a specific network.
Gateway IP address(es)
IP Address Pool Configuration (optional)
If IP address pools will be configured in the
destination context(s), names or identifiers will be
needed for them. The pool name can be between 1
and 31 alpha and/or numeric characters and is case
sensitive.
IP address pool name(s)
L2TP Network Server
8
L2TP Network Server
Destination Context Configuration

Cisco L2TP Specifications

General

Brand	Cisco
Model	L2TP
Category	Server
Language	English