30
Improving Security
Linksys E800
• ActiveX—This filter blocks ActiveX, so you may not be able to access
ActiveX content on websites. To deny ActiveX requests, select this
option. ActiveX content is allowed by default.
• Cookies—This filter blocks cookies, which are data stored on your
computer and used by websites when you interact with them. To deny
cookie requests, select this option. Cookie usage is allowed by default.
4.
Click Save Settings to update your changes.
IPv6 firewall settings
On some router models, the IPv6 firewall lets you customize IPv6 port services
for applications. When users send these types of requests to your network via
the Internet, the router will allow those requests to the appropriate computers.
NOTE
To use your router’s IPv6 Internet connectino settings, IPv6 service
from your ISP (Internet service provider) is required. For more
information on this service, ask your ISP.
To set IPv6 firewall settings:
Applications & Gaming->IPv6 Firewall
1.
Log into the browser-based utility (see “How to open the browser-based
utility” on page 25).
2.
Click the Applications & Gaming tab, then click the IPv6 Firewall page.
3.
Select each setting that you want to change.
• Description—Enter a description of the application.
• IPv6 Address—Enter the IPv6 address of the computer that should
receive the traffic.
• Allow—Select the protocol(s) and range of port(s) used by incoming
traffic.
4.
Click Apply to save your changes. The Allowing Ports section lists the
settings you have saved.
5.
To change a saved setting, click Edit. To delete a saved setting, click
Remove.
To Next Page
Loading...
Need help?
General
