Linksys E-Series.
Wireless Security.
WPA2/WPA Enterprise Mixed Mode, WPA2 Enterprise, WPA WEP
Enterprise
WEP is a basic encryption method, which is not as secure as WPA.
These option is used in coordination with a RADIUS server. (These should only
be used when a RADIUS server is connected to the router.)
NOTE:
If you select WEP as your Security Mode, each device in your
wireless network MUST use WEP and the same encryption and
shared key.
NOTES
If you select WPA2/WPA Enterprise Mixed Mode as your Security
Mode, each device in your wireless network MUST use WPA2/WPA
Enterprise and the same shared key.
If you select WPA2 Enterprise as your Security Mode, each device
in your wireless network MUST use WPA2 Enterprise and the same
shared key.
If you select WPA Enterprise as your Security Mode, each device
in your wireless network MUST use WPA Enterprise and the same
shared key.
Encryption Select a level of WEP encryption, (40/64-bit 10 hex digits) or
104/128-bit (26 hex digits) The default is 40/64-bit (10 hex digits)
Passphrase Enter a passphrase to automatically generate WEP keys. Then
click Generate
Key 1-4 If you did not enter a passphrase, enter the WEP key(s) manually.
RADIUS Server Enter the IP address of the RADIUS server.
TX Key Select a default TX (Transmit) Key to use. The default is 1
RADIUS Port Enter the port number of the RADIUS server.The default is 1812
Shared Key Enter the key shared between the router and the server.
9
To Next Page
Loading...
