Linksys E-Series
Wireless Security
RADIUS Disabled
This option features WEP used in coordination with a RADIUS server. (This If you choose to disable wireless security, you will be informed that wireless
should only be used when a RADIUS server is connected to the router.) security is disabled when you first attempt to access the Internet. You will given
the option to enable wireless security, or confirm that you understand the risks
but still wish to proceed without wireless security.
NOTE:
If you select RADIUS as your Security Mode, each device in your
wireless network MUST use RADIUS and the same encryption and
shared key.
RADIUS Server Enter the IP address of the RADIUS server.
RADIUS Port Enter the port number of the RADIUS server.The default is 1812
Shared Secret Enter the key shared between the router and the server.
Encryption Select a level of WEP encryption, (40/64-bit 10 hex digits) or
104/128-bit (26 hex digits) The default is 40/64-bit (10 hex digits)
Passphrase Enter a passphrase to automatically generate WEP keys. Then
click Generate
Key 1-4 If you did not enter a passphrase, enter the WEP key(s) manually.
TX Key Select a default TX (Transmit) Key to use. The default is 1
10
To Next Page
Loading...
Need help?
General
