Cisco Linksys E900 User Manual

5
Product overview
Linksys E-Series
Bottom view
• Reset button—Press and hold this button for 5-10 seconds (until the
port lights flash at the same time) to reset the router to its factory defaults.
You can also restore the defaults using the browser-based utility. For
more information, see “How to restore factory defaults” on page 61.
Determining your router’s version
To determine your router model’s version, either examine the back panel
(differences are shown on the preceding page) or the system label on the
bottom of the router. If your router is version 2, a V2 appears on the label.
Serial No. / N° de série
MAC Address / Adresse MAC
FCC ID: Q87-E1200V2 IC: 3839A-E1200V2
CANADA ICES/NMB003, RSS210
Class/Classe B
Model No./Modèle: E1200 V2
Rating/Régime nominal: 12V 0.5A
Made in China/Fabriqué en Chine
1288-206

Cisco Linksys E900 Specifications

General

Category	Wireless Router
Frequency Band	2.4 GHz
Wireless Speed	Up to 300 Mbps
Ethernet Ports	4 x 10/100 Mbps LAN, 1 x 10/100 Mbps WAN
Security	WEP, WPA, WPA2
Antennas	2 Internal
Weight	0.6 lbs (0.27 kg)
Model	Linksys E900
Wireless Standards	IEEE 802.11n