Cisco Linksys PLWK400 User Manual

4
Overview
Linksys PLWK400
PLW400
Wi-Fi Protected Setup button—Press this button to connect with
other wireless network devices that have a Wi-Fi Protected Setup
button.
HomePlug Simple Connect button—Configures advanced security
(the network password) for your Powerline network.
Reset button (recessed)—To restore the factory default settings
(including the advanced security settings and the network
password), use a pointed object to press and hold the Reset button
for at least ten seconds.
Powerline LED—The Powerline LED turns on when the adapter is
connected to the Powerline network. The LED flashes to indicate
network activity.
Ethernet LED—The Ethernet LED turns on when a wired network
device is turned on and connected to the adapter’s Ethernet
(network) port. The LED flashes to indicate network activity.
Wireless LED—The Wireless LED turns on when a wireless network
device is connected to your PLW400.
Wi-Fi Protected Setup™ LED—This LED flashes while a wireless
network device is connecting with your PLW400 using Wi-Fi
Protected Setup.
Power LED—The power LED turns on when the adapter is
connected to a powered electrical outlet.
Ethernet port—Use a network (Ethernet) cable to connect this port
to a wired network device.

Cisco Linksys PLWK400 Specifications

General

Brand	Cisco
Model	Linksys PLWK400
Category	Extender
Language	English