Cisco Linksys RE1000 Getting Started

2
Getting Started
RE1000 Range Extender
2
Introduction
This Getting Started guide can help you connect the extender to your network
and solve common setup issues. You can find more help from our award-
winning, 24/7 customer support at Linksys.com/support.
Contents
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
How to install the range extender . . . . . . . . . . . . . . . . 3
How to open the browser-based utility . . . . . . . . . . . 6
Using Wi-Fi Protected Setup . . . . . . . . . . . . . . . . . . . . . 7
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Overview
Front
This light indicates power or Wi-Fi Protected Setup status. After
initial setup, if you have client devices, such as wireless printers,
that support Wi-Fi Protected Setup, then you can use Wi-Fi
Protected Setup to automatically configure wireless security for
your wireless network.
Power (white) When the extender is powered on, resets to
factory defaults, or upgrades its firmware, the light flashes
slowly (every three seconds). When the extender is ready for
use, the light is continuously lit. If there is an error, the light
flashes quickly (every second); disconnect the extender from
the wall mount socket, wait two seconds, and then reconnect it.
Wi-Fi Protected Setup (white) When the Wi-Fi Protected
Setup process is active, the light flashes slowly (every two
seconds) for two minutes. When the Wi-Fi Protected Setup is
successful, the light is continuously lit. If there is an error, the
light flashes quickly (every second) for two minutes; please wait
and try again.

Cisco Linksys RE1000 Specifications

General

Brand	Cisco
Model	Linksys RE1000
Category	Extender
Language	English