Cisco Linksys SFE2000 User Manual

45
Chapter 4: Console Configuration
Configuring the Switch through the Console or Telnet Interface
Linksys One Ready Communications Solution
Chapter
4
c. Select Save to save your changes.
Network Configuration
The Network Configuration screen offers a choice of two tests, Ping and TraceRoute.
Ping
The Ping screen displays the IP address of the location you want to contact.
Select Edit to change the IP address, and select Execute to begin the ping test.
After the ping test is complete, the Ping screen displays the IP address, status, and
statistics of the ping test.
Select Edit to make changes. When your changes are complete, press the Esc key to
return to the Action menu, and select Save to save your changes.
TraceRoute
The TraceRoute screen displays the IP address of the address whose route you want to
trace.
Select Edit to change the IP address, and select Execute to begin the traceroute test.
After the traceroute test is complete, the TraceRoute screen displays the IP address,
status, and statistics of the traceroute test.

Cisco Linksys SFE2000 Specifications

General

Brand	Cisco
Model	Linksys SFE2000
Category	Network Router
Language	English