Cisco Linksys WET610N Quick Installation Guide

Wi-Fi Protected Setup
E. Connect the free end of the
network cable to the device that
you want to equip with wireless.
If you need to move the Bridge,
then make sure you take the
power adapter and
network
cable with you.
Click
ext.
• Wait until the Power and
Ethernet
LEDs are solidly lit, and
the Wireless
LED is flashing.
Click
Next.
G. The wireless settings are
displayed.
To save the settings in a text
file on your desktop, keep the
default,
Save these settings in
a text file on my desktop.
Click Next.
WET61ON
H. The Bridge is installed. You can
move the Bridge anywhere
within your wireless network's
range,
as long as you plug its
power cord
into an electrical
outlet.
Refer to the User Guide on the
CD-ROM for information about
advanced settings.
Congratulations! Set p is complete.
8121810NC-JL
10
Wireless-N Ethernet Bridge
with Dual-Band

Cisco Linksys WET610N Specifications

General

Brand	Cisco
Model	Linksys WET610N
Category	Network Router
Language	English