Cisco Linksys WET610N Quick Installation Guide

Chapter 3
Advanced Configuration
6
Wireless-N Ethernet Bridge with Dual-Band
Wireless > Wireless Network Site Survey
Wireless Network Site Survey
Number of Wireless Networks The number of wireless
networks detected by the Bridge is displayed.
Select To connect to a wireless network, click Select.
Then click Connect.
Wireless Network Name The network name or SSID of
the wireless network is displayed.
GHz The radio band of the wireless network is displayed.
Signal The percentage of signal strength is displayed.
100% is the strongest signal strength possible; 0% is the
weakest possible.
Security If the network supports Wi-Fi Protected Setup,
the Wi-Fi Protected Setup icon is displayed . The security
method used by the wireless network is displayed.
Click Refresh to update the on-screen information.
After you have selected a network, click Connect. A new
screen appears. Follow the instructions for the security
method of your network.
WPA
Wireless Network Site Survey > Wireless Security (WPA)
Network Name (SSID) The name of the network you
selected is automatically displayed.
Security Mode WPA Personal is automatically displayed.
Encryption WPA supports the TKIP encryption method,
with dynamic encryption keys.
Passphrase Enter the key shared by the Bridge and
wireless router or access point. It must have 8-63
characters.
Click Refresh to update the on-screen information.
After you have entered the security settings, click
Connect.
WPA2
Wireless Network Site Survey > Wireless Security (WPA2)
Network Name (SSID) The name of the network you
selected is automatically displayed.
Security Mode WPA2 Personal is automatically
displayed.
Encryption WPA2 supports two encryption methods,
TKIP and AES, with dynamic encryption keys. Select the
encryption method, AES or TKIP or AES.
Passphrase Enter the key shared by the Bridge and
wireless router or access point. It must have 8-63
characters.
Click Refresh to update the on-screen information.
After you have entered the security settings, click
Connect.
WEP
Wireless Network Site Survey > Wireless Security (WEP)
Network Name (SSID) The name of the network you
selected is automatically displayed.

Cisco Linksys WET610N Specifications

General

Brand	Cisco
Model	Linksys WET610N
Category	Network Router
Language	English