Cisco LINKSYS WRT54GX4 - The Status Tab - Wireless; Figure 5-44: Status Tab - Wireless

42
Chapter 5: Configuring the Wireless-G Broadband Router
The Status Tab - Wireless
Wireless-G Broadband Router with SRX400
The Status Tab - Wireless
The Wireless screen on the Status Tab displays the status of your wireless network.
Wireless
MAC Address. This is the Router’s MAC Address, as seen on your local, wireless network.
Mode. As selected from the Wireless tab, this will display the wireless mode (Mixed, G-Only, or Disabled) used by
the network.
SSID. As entered on the Wireless tab, this will display the wireless network name or SSID.
Channel. As entered on the Wireless tab, this will display the channel on which your wireless network is
broadcasting.
Encryption Mode. As selected on the Wireless Security Tab, this will display what type of encryption the Router
uses for security.
Click the Refresh button to update the on-screen information. Help information is shown on the right-hand side
of the screen.
Figure 5-44: Status Tab - Wireless