Wireless-G Broadband Router with SRX400
List of Figures
Figure 3-1: The Router’s Side Panel 6
Figure 3-2: The Router’s LEDs 7
Figure 4-1: Connect a PC 8
Figure 4-2: Connect the Modem 8
Figure 4-3: Connect the Power 8
Figure 4-4: Router’s Stand 9
Figure 4-5: Wall-Mount Measurements 9
Figure 5-1: Password Screen 10
Figure 5-2: Setup Tab - Basic Setup 11
Figure 5-3: DHCP Connection Type 11
Figure 5-4: Static IP Connection Type 12
Figure 5-5: PPPoE Connection Type 12
Figure 5-6: PPTP Connection Type 13
Figure 5-7: Telstra BigPond Connection Type 13
Figure 5-8: Optional Settings 14
Figure 5-9: Router IP 14
Figure 5-10: Network Address Server Settings 15
Figure 5-11: Time Setting 15
Figure 5-12: Setup Tab - DDNS 16
Figure 5-13: Setup Tab - MAC Address Clone 17
Figure 5-14: Setup Tab - Advanced Routing 18
Figure 5-15: Setup Tab - Advanced Routing - NAT Mode 18
Figure 5-16: Setup Tab - Advanced Routing - NAT Mode - Routing Table 19
Figure 5-17: Wireless Tab - Basic Wireless Settings 20
Figure 5-18: Wireless Tab - Wireless Security (WPA/WPA Personal) 21
Figure 5-19: Wireless Tab - Wireless Security (WPA/WPA2 Enterprise) 21
Figure 5-20: Wireless Tab - Wireless Security (WEP) 22
Figure 5-21: Wireless Tab - Wireless MAC Filter 23
Figure 5-22: Wireless MAC Filter - Networked Computers 23
Figure 5-23: Wireless Tab - Advanced Wireless Settings 24
To Next Page
Loading...
Need help?
General
