Cisco Meraki MX64W - User Manual

To Next Page

MX64W Installation Guide

This document describes how to install and set up the MX64W security

appliance. Additional reference documents are available online at:

www.meraki.com/library/products.

MX64W Overview

The Meraki MX64W is an enterprise security appliance designed for

distributed deployments that require remote administration. It is ideal for

network administrators who demand both ease of deployment and a

state-of-the-art feature set. This appliance provides the following new

features:

• USB port, to support approved 3G/4G cards for failover to cellular

networks.

• Support for four LAN connections

• Wall screws and anchors for mounting drywall surface, either

vertically or horizontally

Package contents

In addition to the MX64W, the following are provided.

Main Page

Need help?

Do you have a question about the Cisco Meraki MX64W and is the answer not in the manual?

Summary

MX64 W Overview

Package Contents

MX64 W Front Panel

Status Indicator

Describes LED patterns and their meanings for device status indication.

MX64 W Back Panel

Back Panel Functions

Details functions of USB port, LAN ports, WAN/Internet port, Reset button, and power input.

Mounting Hardware

WAN Connectivity Setup

Setting Up a Static IP Address

Guide to configuring a static IP address for the MX64W.

Setting Up a DHCP IP Address

Instructions for configuring the MX64W using DHCP from upstream servers.

Advanced Configuration Options

Setting VLANs

How to configure VLAN tagging for a trunk port WAN uplink.

Setting Up Secondary WAN Interface

Configuring the LAN4 port for a secondary WAN connection (dual WAN).

Setting PPPoE

Steps for configuring PPPoE authentication for DSL circuits.

Web Proxy Settings

How to enable web proxy for fallback communication with the Cloud Controller.

Physical Link Settings