Cisco Meraki MX68 User Manual

A steady green LED indicates bidirectional connectivity,
and flashing green indicates traffic.
Power input Designed for use only with the unit’s power supply.
Reset button
Insert a paper clip if a reset is required.
Press for 1 second to delete a downloaded configuration
and reboot.
Press and hold for more than 10 seconds to force a full
factory reset.
MX68
MX68W
6

Cisco Meraki MX68 Specifications

General

Model	MX68
Category	Security System
WAN Interfaces	2 x GbE
Recommended Clients	50
Firewall Throughput	450 Mbps
VPN Throughput	200 Mbps
Maximum VPN Tunnels	50
USB Interface	1 x USB 2.0
Operating Temperature	32°F to 104°F (0°C to 40°C)
LAN Interfaces	4 x GbE
Power Supply	DC 12V
Operating Humidity	5% to 95% non-condensing