Cisco Meraki MX68 Hardware Installation Guide

MX75 Hardware Installation Guide
This guide provides instruction on how to install and configure your MX75 series device. This guide also provides mounting instructions and limited
troubleshooting procedures. For more MX device installation guides, refer to the MX installation guides section on our documentation website.
Product Overview
The Meraki MX75 is an enterprise security appliance designed for distributed deployments that require remote administration across medium branch
environments. It is ideal for network administrators who demand both ease of deployment and a state-of-the-art feature set. The Meraki Dashboard allows for
simple and easy deployment of the MX75 with minimal pre-configuration in almost any location.
1

Cisco Meraki MX68 Specifications

General

Model	MX68
Category	Security System
WAN Interfaces	2 x GbE
Recommended Clients	50
Firewall Throughput	450 Mbps
VPN Throughput	200 Mbps
Maximum VPN Tunnels	50
USB Interface	1 x USB 2.0
Operating Temperature	32°F to 104°F (0°C to 40°C)
LAN Interfaces	4 x GbE
Power Supply	DC 12V
Operating Humidity	5% to 95% non-condensing