Cisco MERAKI MX75 User Manual

MX75 Hardware Installation Guide
This guide provides instruction on how to install and configure your MX75 series device. This guide also provides mounting instructions and limited
troubleshooting procedures. For more MX device installation guides, refer to the MX installation guides section on our documentation website.
Product Overview
The Meraki MX75 is an enterprise security appliance designed for distributed deployments that require remote administration across medium branch
environments. It is ideal for network administrators who demand both ease of deployment and a state-of-the-art feature set. The Meraki Dashboard allows for
simple and easy deployment of the MX75 with minimal pre-configuration in almost any location.
1

Cisco MERAKI MX75 Specifications

General

Form Factor	Desktop
WAN Ports	2
Power Supply	100-240V AC, 50-60Hz
Weight	3.75 lbs (1.7 kg)
SFP Ports	2
Max. concurrent clients	200
USB ports	1
Power over Ethernet (PoE)	No
Operating temperature	32°F to 104°F (0°C to 40°C)
Operating humidity	5% to 95% (non-condensing)
LAN Ports	8

Summary

MX75 Panel Functions

Back Panel Reset Function

Instructions for using the reset button for configuration and factory reset.

Safety and Warnings

Safety and Warnings

Essential safety guidelines for installation and operation, covering electrical hazards and device protection.

Pre-install Preparation

Configure your Dashboard Network

Steps to log in, create/find a network, add the MX, and place it on the map.

Check and Set Firmware

Procedure to ensure the MX has the latest firmware before mounting.

Check and Configure Upstream Firewall Settings

Ensuring upstream firewall allows necessary outbound connections for the MX.

Installation Instructions

Mounting Recommendations

Guidelines for mounting the MX75 on a drywall surface, including hole spacing and clearance.

Connecting to WAN

Setting up a Static IP Address

Instructions for configuring a static IP address for the MX device.

Setting up a DHCP IP Address

Additional Settings

Web Proxy Settings

Configuring Physical Link Settings

Basic Troubleshooting

Basic Troubleshooting