To Next PageTo Next Page
Need help?Do you have a question about the Cisco ME 1200 Series and is the answer not in the manual?
General| Model | ME 1200 Series |
|---|---|
| Category | Network Hardware |
| Layer | Layer 2 |
| Type | Ethernet Access Device |
| Management | CLI, SNMP, Web UI |
| Power Supply | AC or DC options available |
| Features | QoS, VLAN support |
| Humidity Range | 5% to 95% non-condensing |
| Compliance | FCC, CE, RoHS |
Overview of switch setup, port connections, and troubleshooting procedures.
Details available Cisco ME1200 NID models and their specifications.
Description of front panel components, ports, and indicators on the switch.
Functionality and configuration requirements for the console port used for debugging.
Information on 10/100/1000 Ethernet ports, cabling, and auto-negotiation.
Supported SFP modules and compatibility details for the switch.
Explanation of the various LEDs on the switch and their status indications.
Details the System LED's states for monitoring switch health and operation.
Describes the status and activity indicators for individual network ports.
Description of the rear panel components and connections of the switch.
Overview of different methods and configurations for managing the Cisco ME1200 NID.
Guidance on network configuration concepts and examples for switch deployment.
Essential safety instructions and warnings for equipment installation and handling.
General guidelines and prerequisites for the proper installation of the Cisco ME1200 NID.
Covers rack-mounting, wall-mounting, and desktop installation procedures for the switch.
Detailed instructions for mounting the switch in 19-inch, 23-inch, or ETSI racks.
Steps for selecting and attaching the correct mounting brackets to the switch.
Procedures for securely fastening the switch with brackets into an equipment rack.
Specifics for mounting using 19-inch, 23-inch, and ETSI rack brackets.
Step-by-step guide for securely mounting the Cisco ME1200 NID onto a wall.
Instructions for installing the switch on a table or shelf for desktop use.
Procedures for installing and removing SFP modules from the switch.
Step-by-step guide for inserting SFP modules into the switch's SFP slots.
How to install a retainer clip to secure the AC power cord.
Steps for connecting the AC power cord to the switch.
Guidance on connecting an external AC-to-DC power adapter.
Procedures for safely and correctly wiring the DC input power source.
Instructions and safety precautions for proper grounding of the Cisco ME1200 NID.
Using LEDs and CLI for diagnosing switch issues and performance.
Identifying and resolving performance problems like speed or duplex mismatches.
Common configuration issues and solutions for speed and duplex mismatches.
Troubleshooting auto-negotiation problems with third-party network interface cards.
Checking cable distances to ensure optimal port performance and error prevention.
Finding the serial number for technical assistance and support.
Details environmental ranges and technical specifications for the Cisco ME1200 NID switch.
Provides environmental and technical specifications for the external power adapter.
Pin-out details for the RJ-45 Ethernet ports on the switch.
Diagrams and descriptions of SFP module connectors used in the switch.
Details on fiber-optic SFP module port cabling, including fiber types and distances.
Schematics for straight-through and crossover Ethernet cables for connectivity.
Pin-out information for console port adapters and cable connections.
