Cisco ME 1200 Series - SFP Module Cabling Specifications

B-2
Cisco ME 1200 Series Carrier Ethernet Access Devices Hardware Installation Guide
OL-31962-04
Appendix B Connector and Cable Specifications
SFP Module Cabling
Figure B-2 Duplex LC Cable Connector
Figure B-3 Simplex LC Cable Connector
Figure B-4 Copper SFP Module RJ-45 Connector
SFP Module Cabling
Each port must match the wave-length specifications on the other end of the cable, and for reliable
communications, the cable must not exceed the required cable length. Copper 1000BASE-T SFP
transceivers use standard four twisted-pair, Category 5 (or greater) cable at lengths up to 328 feet
(100meters).