Cisco ME 1200 Series - Mounting in a Rack

2-6
Cisco ME 1200 Series Carrier Ethernet Access Devices Hardware Installation Guide
OL-31962-04
Chapter 2 Installing the Cisco ME 1200 NID
Installation the Switch
Attaching Brackets to the Switch
Figure 2-2 Attaching Brackets for 19-Inch, 23-Inch and ETSI Racks
Mounting in a Rack
After the brackets are attached on the switch, use the four supplied number-12 Phillips machine screws to
securely attach the brackets to the rack. See Figure 2-3 for standard rack-mounting using the 19-inch,
23-inch, and ETSI brackets.
1
Phillips flat-head screws
2
Front-mounting position