Cisco MX200G2 - Page 14

In-Room Control on Touch10
for Cisco TelePresence
MX200 G2, MX300 G2,
MX700, MX800,
SX10, SX20, SX80
Collaboration Endpoint
software version CE8.2
D15358.02 - JULY 2016
www.cisco.com
© 2016 Cisco Systems, Inc.
All rights reserved.
14
Connect to the video system
The video system's API (also known as the xAPI) allows bidirectional
communication with third-party control systems, such as those from
AMX or Crestron. There are multiple ways to access the xAPI:
• Telnet
• SSH
• HTTP/HTTPS
• Ethernet port
• RS-232 / serial connection
Regardless of the method you choose, the structure of the xAPI is
the same. Choose the access method that suits your application and
video system the best.
Consult the API guide for your video system to get a full description
of available access methods and how to use the xAPI. Go to
http://www.cisco.com/go/sx-docs for SX Series, or
http://www.cisco.com/go/mx-docs for MX Series
Then, click Reference Guides > Command References to find the API
guides.
API for programming in-room controls
Table of contents
Introduction
Create a user interface
API for in-room control
Widgets
Command reference
Troubleshooting
Tips and tricks
Examples
API for in-room control