Cisco MX300 G2 User Manual

19
D1507602 User Guide
Cisco TelePresence MX200 G2, MX300 G2
SX80
Produced: April 2014 for TC 7.1
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.
Hold
Put Call on Hold and Resume a Call on Hold
Assume that
you are in a
call. Tap Hold,
as outlined.
Tap Resume to
go back to the
one you were in
call with (to undo
your action).
Putting someone on hold is typically
something you do as an initial step
when transferring someone to
another person, but it may also be
used when you need to consult a
person or as an alternative to muting
also including stopping the video
transmission.
About Putting on Hold

Cisco MX300 G2 Specifications

General

Microphone	Integrated microphone array
Connectivity	Ethernet, HDMI, USB
Frame Rate	60 fps
Protocols	SIP, H.323
Video Conferencing Support	Yes
Operating System	Cisco Collaboration Endpoint Software
Camera	PrecisionHD Camera 1080p
Display	27-inch LCD
Control	Touchscreen controller
Product Type	Video conferencing system
Video Standards	H.264, H.265
Power	100-240 VAC, 50/60 Hz, 12.5 A