Cisco MX300 G2 User Manual

63
D1507602 User Guide
Cisco TelePresence MX200 G2, MX300 G2
SX80
Produced: April 2014 for TC 7.1
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.
This window lets you specify your
preferred date and time formats, as
well as the time zone.
If you set the Date and Time Mode
to Auto (as has been done in this
example), the system will look for an
NTP server and get date and time
from there.
If you choose to set NTP mode to
Manual (as has been done in this
example), you must specify the NTP
server address to make things work.
Settings
Administrator Settings—Set Date and Time
About Time Setting

Cisco MX300 G2 Specifications

General

Microphone	Integrated microphone array
Connectivity	Ethernet, HDMI, USB
Frame Rate	60 fps
Protocols	SIP, H.323
Video Conferencing Support	Yes
Operating System	Cisco Collaboration Endpoint Software
Camera	PrecisionHD Camera 1080p
Display	27-inch LCD
Control	Touchscreen controller
Product Type	Video conferencing system
Video Standards	H.264, H.265
Power	100-240 VAC, 50/60 Hz, 12.5 A