Cisco NCS 1014 User Manual

• Remove the cable retainers and the power cables, in case of an AC power supply unit.
• Remove the protection covers, fasteners, and lugs, in case of a DC power supply unit.
Step 1 Press the locking latch towards the left to release the lock.
Figure 1: Locking Latch on the DC PSU
Locking latch1
Remove and Replace Cisco NCS 1014 Modules
3
Remove and Replace Cisco NCS 1014 Modules
Remove and Replace the Power Supply Unit (PSU)

Cisco NCS 1014 Specifications

General

Brand	Cisco
Model	NCS 1014
Category	Chassis
Language	English