Send document comments to nexus5k-docfeedback@cisco.com.
1-4
Cisco Nexus 5000 Series Troubleshooting Guide
OL-25300-01
Chapter 1 Troubleshooting System Management Issues
Logging
• Check to see if the destination syslog server is accessible from VRF management. Use the ping
<dest-ip> vrf management command to ping the server.
• Check that the syslog configuration on the DUT has use-vrf management.
Example:
logging server 10.193.12.1 5 use-vrf management
• Check that the appropriate logging level is enabled to send logging messages. Use the show logging
info command. If the logging level is not appropriate, then set the appropriate level using the
logging level <feature> <log-level> command.
To Next Page
Loading...
