Cisco Nexus 5548UP - Power Supply

© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 24 of 29
Physical Specifications
SFP+ Optics
Cisco Nexus 5500 platform supports 10 Gigabit Ethernet SFP+ copper Twinax cables for short distances and SFP+ optics (10GBASE-SR,
10GBASE-LR, 10GBASE-ER, GLC-ZX-SM and Cisco Nexus 2000 Series Fabric Extender Transceiver [FET-10G]) for longer distances. SFP+ has
several advantages compared to other 10 Gigabit Ethernet connectivity options:
●
Small 10 Gigabit Ethernet form factor
●
Optical interoperability with XENPAK, X2, and XFP interface types
●
Low power consumption
●
Hot-swappable device
●
Cisco Nexus 5500 platform products support 8-Gbps Fibre Channel-compatible SFP+ for native Fibre Channel connectivity options; 8-Gbps
Fibre Channel-compatible short-reach and 10-km long-reach SFP transceiver modules operate at 8/4/2 Gbps and are supported in the 8-Gbps-
capable native Fibre Channel ports on expansion modules and unified ports
SFP Optics
The Cisco Nexus 5500 platform supports Gigabit Ethernet SFP for Gigabit Ethernet connectivity options, available
in both standard and extended temperature ranges with Digital Optical Monitoring (DOM) support. The following
SFP transceiver modules are supported by hardware in all ports of the Cisco Nexus 5500 platform:
●
Cisco 1000BASE-T SFP
●
Cisco 1000BASE-SX SFP
●
Cisco 1000BASE-LX/LR SFP
●
Cisco 8/4/2/1-Gbps Fibre Channel SFP
Power Supply
Table 7 lists the power supply properties of the Cisco Nexus 5500 platform.
Table 7. Power Supply Properties
AC Power Supply Properties Cisco Nexus 5548P and 5548UP Cisco Nexus 5596UP Cisco Nexus 5596T
Typical operating power 390W 660W 900W
Maximum power (Layer 2) 600W (without Layer 3 daughter
card)
882W (without Layer 3 expansion
module)
1050W (with 3x 10G BASE-T (Cu)
expansion module)
Maximum power (Layer 3) 730W (with Layer 3 daughter card) 972W (with Layer 3 expansion
module)
1050W (with 3x 10G BASE-T (Cu)
expansion module)
Input voltage 100 to 240 VAC 100 to 240 VAC 100 to 240 VAC
Frequency 50 to 60 Hz 50 to 60 Hz 50 to 60 Hz
Efficiency 95 to 98% (50 to 100% load) 95 to 98% (50 to 100% load) 95 to 98% (50 to 100% load)
RoHS compliance Yes Yes Yes
Hot swappable Yes Yes Yes
Typical heat dissipation 1331 BTU/hr 2252 BTU/hr 3071 BTU/hr
Front-to-back air flow power
supply
Yes Yes Yes
Back-to-front air flow power
supply
Yes (only on Cisco Nexus 5548UP;
need fan tray as well)
Yes Yes
DC Power Supply Properties Cisco Nexus 5548P and 5548UP Cisco Nexus 5596UP Cisco Nexus 5596T
Typical operating power 390W 680W 900W
Maximum power (Layer 2) 680W (without Layer 3 daughter
card)
882W (without Layer 3 expansion
module)
1050W (with 3x 10G BASE-T (Cu)
expansion module)
Maximum power (Layer 3) 730W (with Layer 3 daughter card) 1079W (with Layer 3 expansion
module)
1079W (with 3x 10G BASE-T (Cu)
expansion module)