4-2
Cisco Nexus 5000 Series Hardware Installation Guide
Chapter 4 Replacing Components
Replacing an I/O Module for a Cisco Nexus 5548 Switch
Figure 4-1 Product ID on a Layer 3 I/O Module
This section includes the following topics:
• Removing an I/O Module, page 4-2
• Installing an I/O Module, page 4-4
Removing an I/O Module
To remove an I/O module from a Cisco Nexus 5548 chassis, follow these steps:
Step 1 Prepare an antistatic surface for placing removed components.
Step 2 On the right fan module, loosen its captive screw so that it is no longer connected to the chassis or I/O
module (see Callout 1 in Figure 4-2).
239213
1
1 Layer 3 modules have an N55-D160L3 or
N55-D160L3-V2 product ID. Layer 2 modules do
not list a PID.
To Next Page
Loading...
