Show Commands
show ipv6 pim vrf
MCR-115
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
show ipv6 pim vrf
To display information about IPv6 Protocol Independent Multicast (PIM6) by virtual routing and
forwarding (VRF) instance, use the show ipv6 pim vrf command.
show ipv6 pim vrf [vrf-name | all]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command requires the Enterprise Services license.
Examples This example shows how to display information about PIM6 by VRF:
switch(config)# show ipv6 pim vrf
switch(config)#
vrf-name (Optional) VRF name. The name can be a maximum of 32 alphanumeric characters
and is case sensitive.
all (Optional) Specifies all VRFs.
Release Modification
5.0(3)N1(1) This command was introduced.
To Next Page
Loading...
