Cisco Nexus 5600 Series - Page 120

Show Commands
show routing ip multicast event-history
MCR-116
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
show routing ip multicast event-history
To display information in the IPv4 Multicast Routing Information Base (MRIB) event history buffers,
use the show routing ip multicast event-history command.
show routing ip multicast event-history {cli | errors | mfdm-debugs | mfdm-stats | msgs | rib |
statistics | vrf}
Syntax Description
Command Default None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display information in the MRIB msgs event history buffer:
switch(config)# show routing ip multicast event-history msgs
Msg events for MRIB Process
1) Event:E_DEBUG, length:38, at 932956 usecs after Sat Apr 12 09:09:41 2008
[100] : nvdb: transient thread created
2) Event:E_DEBUG, length:38, at 932269 usecs after Sat Apr 12 09:09:41 2008
[100] : nvdb: create transcient thread
cli Displays the event history buffer of type CLI.
errors Displays the event history buffer of type errors.
mfdm-debugs Displays the event history buffer of type multicast FIB distribution (MFDM).
mfdm-stats Displays the event history buffer of type MFDM sum.
msgs Displays the event history buffer of type msgs.
rib Displays the event history buffer of type RIB.
statistics Displays information about the event history buffers.
vrf Displays the event history buffer of type virtual routing and forwarding (VRF).
Release Modification
5.0(3)N1(1) This command was introduced.