Cisco Nexus 5600 Series - Page 122

Show Commands
show hardware proxy layer-3 detail
MCR-118
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
show hardware proxy layer-3 detail
To display detail proxy Layer 3 forwarding information, use the show hardware proxy layer-3 detail
command.
show hardware proxy layer-3 detail
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes EXEC
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
This command applies only to Cisco Nexus 7000 Series chassis that contain an F1 Series module or an
M1 Series module. This command applies when you are running either FabricPath or Ethernet interfaces.
Examples This example shows how to display detail proxy Layer 3 forwarding information:
switch# show hardware proxy layer-3 detail
switch#
Related Commands
Release Modification
5.1(1) This command was introduced.
Command Description
show hardware proxy
layer-3 detail
Displays detailed information on the proxy Layer 3 functionality.