Cisco Nexus 5600 Series - Page 134

Show Commands
show running-config pim
MCR-130
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
show running-config pim
To display information about the running-system configuration for IPv4 Protocol Independent Multicast
(PIM), use the show running-config pim command.
show running-config pim [all]
Syntax Description
Command Default None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command requires the LAN Base Services license.
Examples This example shows how to display information about the IPv4 PIM running-system configuration:
switch(config)# show running-config pim
!Command: show running-config pim
!Time: Sat Apr 12 09:15:11 2008
version 5.0(3)N1(1)
feature pim
ip pim ssm range 232.0.0.0/8
interface Vlan20
ip pim sparse-mode
switch(config)#
all (Optional) Displays configured and default information.
Release Modification
5.0(3)N1(1) This command was introduced.