Cisco Nexus 5600 Series - Page 135

Show Commands
show running-config pim6
MCR-131
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
show running-config pim6
To display information about the running-system configuration for IPv6 Protocol Independent Multicast
(PIM6), use the show running-config pim6 command.
show running-config pim6 [all]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command requires the Enterprise Services license.
Examples This example shows how to display information about the PIM6 running-system configuration:
switch(config)# show running-config pim6
version 4.0(3)
feature pim6
ipv6 pim bidir-rp-limit 3
ipv6 pim rp-address 2001:0db8::abcd:0000:0000:0000:0001 group-list ff1e:abcd:def1::/96
ipv6 pim rp-candidate Ethernet2/11 group-list ff1e:abcd:def1::/24
ipv6 pim register-policy my_register_policy
ipv6 pim ssm range ff30::/32
ipv6 pim flush-routes
interface Ethernet2/12
ipv6 pim sparse-mode
ipv6 pim hello-interval 22222
switch(config)#
all (Optional) Displays configured and default information.
Release Modification
5.0(3)N1(1) This command was introduced.