Cisco Nexus 5600 Series - Page 153

149
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter I Commands
ip igmp enforce-router-alert
ip igmp enforce-router-alert
To enable the enforce router alert option check for IGMPv2 and IGMPv3 packets, use the ip igmp
enforce-router-alert command. To disable the option check, use the no form of this command.
ip igmp enforce-router-alert
no ip igmp enforce-router-alert
Syntax Description This command has no arguments or keywords.
Command Default Enabled
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to enable the enforce router alert option check:
switch(config)# ip igmp enforce-router-alert
This example shows how to disable the enforce router alert option check:
switch(config)# no ip igmp enforce-router-alert
Related Commands
Release Modification
6.0(2)N1(1) This command was introduced.
Command Description
show running-config
igmp
Displays information about the IGMP running-system configuration.