Cisco Nexus 5600 Series - Page 232

228
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter Show Commands
show ip igmp snooping statistics
show ip igmp snooping statistics
To display information about IGMP snooping statistics, use the show ip igmp snooping statistics
command.
show ip igmp snooping statistics [vlan vlan-id | global]
Syntax Description
Command Default None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines When you use this command without any options, the system prints statistics for all VLANs.
This command does not require a license.
Examples This example shows how to display information about IGMP snooping statistics for VLAN 1:
switch(config)# show ip igmp snooping statistics vlan 1
vlan vlan-id (Optional) Specifies a VLAN. The range is from 1 to 3967 and 4048 to 4093.
global (Optional) Specifies the global statistics.
Release Modification
6.0(2)N1(1) This command was introduced.
4.1(3) Changed output to include vPC information.
4.2(1) Enhanced output for vPC information.
4.2(2) Changed command to make the vlan argument optional and to introduce the
optional global argument.