Cisco Nexus 5600 Series - Page 231

227
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter Show Commands
show ip igmp snooping querier
show ip igmp snooping querier
To display information about IGMP snooping queriers, use the show ip igmp snooping querier
command.
show ip igmp snooping querier [vlan vlan-id]
Syntax Description
Command Default None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display information about IGMP snooping queriers:
switch(config)# show ip igmp snooping querier
vlan vlan-id (Optional) Specifies a VLAN. The range is from 1 to 3967 and 4048 to 4093.
Release Modification
6.0(2)N1(1) This command was introduced.