Cisco Nexus 5600 Series - clear ip msdp peer

231
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter C Commands
clear ip msdp peer
clear ip msdp peer
To clear a TCP connection to Multicast Source Discovery Protocol (MSDP) peers, use the clear ip msdp
peer command.
clear ip msdp peer peer-address [vrf vrf-name | default | management]
Syntax Description
Command Default None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command requires the LAN Base Services license.
Examples This example shows how to clear a TCP connection to an MSDP peer:
switch# clear ip msdp peer 192.168.1.10
switch#
Related Commands
peer-address IP address of the MSDP peer.
vrf (Optional) Clears the virtual routing and forwarding (VRF) instance information.
vrf-name VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
default Specifies that the default VRF entry be cleared from the multicast routing table.
management Specifies that the management VRF entry be cleared from the multicast routing table.
Release Modification
6.0(2)N1(1) This command was introduced.
Command Description
show ip msdp peer Displays information about MSDP peers.