Cisco Nexus 5600 Series - Page 236

232
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter C Commands
clear ip msdp policy statistics sa-policy
clear ip msdp policy statistics sa-policy
To clear the Source-Active (SA) policy for Multicast Source Discovery Protocol (MSDP) peers, use the
clear ip msdp policy statistics sa-policy command.
clear ip msdp policy statistics sa-policy peer-address {in | out} [vrf vrf-name | default |
management]
Syntax Description
Command Default None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command requires the LAN Base Services license.
Examples This example shows how to clear an SA policy for an MSDP peer:
switch# clear ip msdp policy statistics sa-policy
switch#
Related Commands
peer-address IP address of the MSDP peer for the SA policy.
in Specifies the input policy.
out Specifies the output policy.
vrf (Optional) Clears the virtual routing and forwarding (VRF) instance information.
vrf-name VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
default (Optional) Specifies that the default VRF entry be cleared from the multicast routing
table.
management (Optional) Specifies that the management VRF entry be cleared from the multicast
routing table.
Release Modification
6.0(2)N1(1) This command was introduced.