Cisco Nexus 5600 Series - Page 289

285
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter C Commands
clear ip pim interface statistics
clear ip pim interface statistics
To clear Protocol Independent Multicast (PIM) counters for a specified interface, use the clear ip pim
interface statistics command.
clear ip pim interface statistics [ethernet slot/port | port-channel
channel-number[.sub_if-number] | vlan vlan-id]
Syntax Description
Command Default None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command requires the LAN Base Services license.
Examples This example shows how to clear the PIM counters for a specified interface:
switch# clear ip pim interface statistics ethernet 2/1
switch#
Related Commands
ethernet
slot/port
(Optional) Specifies the Ethernet interface. The slot number is from 1 to 255, and the
port number is from 1 to 128.
port-channel
number
(Optional) Specifies the EtherChannel interface and EtherChannel number. The
range is from 1 to 4096.
sub_if-number (Optional) Subinterface number. The range is from 1 to 4093.
vlan vlan-id (Optional) Specifies the VLAN. The range is from 1 to 4094.
Release Modification
6.0(2)N1(1) This command was introduced.
Command Description
show ip pim statistics Displays PIM statistics.