Cisco Nexus 5600 Series - Page 290

286
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter C Commands
clear ip pim policy statistics
clear ip pim policy statistics
To clear Protocol Independent Multicast (PIM) policy counters, use the clear ip pim policy statistics
command.
clear ip pim policy statistics {jp-policy | neighbor-policy} {ethernet slot/port | port-channel
channel-number[.sub_if-number] | vlan vlan-id}
clear ip pim policy statistics register-policy [vrf {vrf-name | all | default | management}]
clear ip pim policy statistics {register-policy | bsr {bsr-policy | rp-candidate-policy} | auto-rp
{rp-candidate-policy | mapping-agent-policy}} [vrf {vrf-name | all}]
Syntax Description jp-policy Specifies statistics for the join-prune policy.
neighbor-
policy
Specifies statistics for the neighbor policy.
ethernet
slot/port
Specifies the Ethernet interface and the slot number and port number. The slot
number is from 1 to 255, and the port number is from 1 to 128.
loopback
if_number
(Optional) Specifies the loopback interface. The loopback interface number is from
0 to 1023.
port-channel
number
Specifies the EtherChannel interface and EtherChannel number. The range is from 1
to 4096.
sub_if-number (Optional) Subinterface number. The range is from 1 to 4093.
vlan Specifies the VLAN.
vlan-id VLAN number. The range is from 1 to 4094.
if-type Interface type. For more information, use the question mark (?) online help function.
if-number Interface or subinterface number. For more information about the numbering syntax
for your networking device, use the question mark (?) online help function.
register-policy Specifies statistics for the register policy.
bsr Specifies the bootstrap protocol RP-distribution policy.
bsr-policy Specifies the statistics for BSR messages.
rp-candidate-
policy
Specifies the statistics for RP candidate messages.
auto-rp Specifies the statistics for Auto-RP messages.
mapping-
agent-policy
Specifies the statistics for mapping agent messages.
vrf (Optional) Clears the virtual routing and forwarding (VRF) instance information.
vrf-name VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
all Specifies that all VRF entries be cleared from the IPv4 multicast routing table.
default Specifies that the default VRF entry be cleared from the IPv4 multicast routing table.
management Specifies that the management VRF entry be cleared from the IPv4 multicast routing
table.