Cisco Nexus 5600 Series - Page 30

Show Commands
show forwarding ipv6 multicast route
MCR-26
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
show forwarding ipv6 multicast route
To display information about the IPv6 multicast routes, use the show forwarding ipv6 multicast route
command.
show forwarding [vrf {vrf-name | all}] ipv6 multicast route {[group {group | group-addr} |
source {source | source-addr} | module num | vrf {vrf-name | all}] | summary [module num |
vrf {vrf-name | all}]}
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
vrf (Optional) Displays routes for a specific virtual routing and forwarding (VRF)
instance.
vrf-name VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
all Displays information for all VRFs.
group (Optional) Specifies multicast IPv6 group address.
group Multicast IPv6 group address with prefix.
group-addr Multicast IPv6 group address.
source Specifies multicast IPv6 source address.
source Multicast IPv6 source address with prefix.
source-addr Multicast IPv6 source address.
module num (Optional) Specifies module number.
summary Displays route counts.
Release Modification
5.0(3)N1(1) This command was introduced.
4.1(3) Added the group-addr and source-addr arguments.