Cisco Nexus 5600 Series - Page 31

Show Commands
show forwarding ipv6 multicast route
MCR-27
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Examples This example shows how to display information about the IPv6 multicast routes:
switch(config)# show forwarding ipv6 multicast route
IPv6 Multicast Routing table table-id:0x80000001
Total number of groups: 0
Legend:
C = Control Route
D = Drop Route
G = Local Group (directly connected receivers)
O = Drop on RPF failure
P = Punt to Supervisor
(*, ff00::/8), RPF Interface: NULL, flags: DW
Received Packets: 0 Bytes: 0
Number of Outgoing Interfaces: 0
Null Outgoing Interface List
(*, ff01::/16), RPF Interface: NULL, flags: DW
Received Packets: 0 Bytes: 0
Number of Outgoing Interfaces: 0
Null Outgoing Interface List
(*, ff02::/16), RPF Interface: NULL, flags: CPW
Received Packets: 0 Bytes: 0
Number of Outgoing Interfaces: 0
Null Outgoing Interface List
(*, ff11::/16), RPF Interface: NULL, flags: DW
Received Packets: 0 Bytes: 0
Number of Outgoing Interfaces: 0
Null Outgoing Interface List
(*, ff12::/16), RPF Interface: NULL, flags: CPW
Received Packets: 0 Bytes: 0
Number of Outgoing Interfaces: 0
Null Outgoing Interface List
switch(config)#