Show Commands
show forwarding multicast outgoing-interface-list
MCR-28
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
show forwarding multicast outgoing-interface-list
To display information about the multicast Forwarding Information Base (FIB) outgoing interface (OIF)
list, use the show forwarding multicast outgoing-interface-list command.
show forwarding multicast outgoing-interface-list [module num] [index]
Syntax Description
Command Default None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display information about the multicast FIB OIF list:
switch# show forwarding multicast outgoing-interface-list
Outgoing Interface List Index: 1
Reference Count: 1
Ethernet1/5
switch#
Related Commands
module num (Optional) Specifies the module number.
index (Optional) OIF list index. The OIF list index is from 1 to 65535.
Release Modification
5.0(3)N1(1) This command was introduced.
Command Description
ip igmp static-oif Binds a multicast group to the outgoing interface (OIF).
clear ip igmp interface
statistics
Clears the IGMP statistics for an interface.
To Next Page
Loading...
